Yeelight LED 2nd Gen wont show up in google home

j1016h · 2018 年8 月 11 日 20:19

Hi,
I bought Yeelight LED white 2nd on amazon usa. But I setup my yeelight and mihome on china mainland server since gate way is not supported in US server.
When I connect mi home to google home. Only my old 1st gen led bulb shows up in google home. This new 2nd gen wont show up there.

dingyichen · 2018 年8 月 13 日 02:30

Mihome skill is not controlled by Yeelight, we have let them know the issue.

You can have a try with Yeelight skill which support servers except Mainland china server.

dingyichen · 2018 年8 月 13 日 02:52

Please refer to the topic, if you have interest.

Grant1 · 2018 年8 月 28 日 05:16

Hi Andy my second generation colour yeelight is not showing in my Google home device list. I am using Singapore server. Have control work with yeelight phone app but unable to integrate with home assistant. My ID is 1764074223 Any help appreciated. My location is New Zealand.

coasterli · 2018 年8 月 28 日 05:40

Make sure you have connected Yeelight service instead MiHome service in Google Home app. @Grant1

Grant1 · 2018 年8 月 28 日 06:42

I am conneIcting

to yeelight service.I see many similar problems in forum. All good until assign room then get message successfully linked and jumps to add device but yeelight has not been added.

coasterli · 2018 年8 月 28 日 06:44

@Grant1 show me your xiaomi id.

yusure · 2018 年8 月 28 日 06:46

Could you take a screenshot on GoogleHome App?

coasterli · 2018 年8 月 28 日 06:52

Don’t bother MiHome service. We have added Google Home support to all those devices connected to Mainland China server. Try Yeelight service in Google Home app. @j1016h

Grant1 · 2018 年8 月 28 日 07:03

ID 1764074223 grant9459@xtra.co.nz

yusure · 2018 年8 月 28 日 07:27

OK, recorded. please try sync devices later.

199724 · 2019 年1 月 28 日 23:33

My 2nd gen Yeelight bulbs are heavily dependent on the Xiaomi hub and Aqara motion sensors. These are not available on anything but China server. This means I must connect Assistant through Mi. How else can I connect to Aqara sensors? I don’t understand. V1 had no issues…

watergun · 2020 年1 月 11 日 12:03

Hi,

I just installed Yeelight smart led bulb color 800 lumens 10W E27
I need to connect to China server in order for my Mi Home & Yeelight apps to show the 2 bulbs. I can control them in both Mi Home & Yeelight Apps
But i cannot add the bulbs to Google Home (I am in Singapore). It can link to Yeelight service in Google Home but cannot see the bulbs.
My Mi is 249772368
Please advise